which nozzle to buy for ultimaker 2ext
https://www.lulzbot.com/store/filament/stainless-steel-pla
stainless steel filament proto-pasta
Filament Specifications
Filament Diameter: 2.85 mm (0.11 inches)
Amount of Filament: 500 g (1.1 lbs)
Average Length of Filament: 36 m ( 5m per robot = 7 robots)
US$56.00
Filament color may vary
- Compatibility Alert:Due to the blended metal powder found in this filament, we strongly recommend using a LulzBot Tool Head with a .5mm nozzle for optimal 3D printing performance.
- Prolonged use:While our internal testing with the LulzBot Hexagon Hot End has not encountered measurable wear on the tool head, pay attention for any print quality changes.
https://www.proto-pasta.com/products/stainless-steel-pla?variant=1265199848
500grm, 49.99us
500grm=36m
125grm = 9m
13.8grm = 1m
69grm = 5m
50grm= not enough to print one robot
.5mm nozzle for optimal 3d printing performance
.4mm available here...
http://www.ebay.com/itm/V5-V6-0-25-0-4-0-8mm-Stainless-Steel-Nozzle-for-3D-Printer-1-75-3mm-Filament/201650153537?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D41375%26meid%3Dace690e7f34341cf8aa01eec797ced49%26pid%3D100005%26rk%3D5%26rkt%3D6%26sd%3D291751131663
No comments:
Post a Comment