Elle ***half

Elle ***half dir Verhoeven w Isabelle Huppert

bai ji glue receipe by Dominic Eckersley

Dominic Eckersley I'm afraid I neglected to think to take photos from the beginning of the process... but next time I will. That said, I have a lot of the baiji now, enough for a year if it does not go mouldy! I bought two Bletilla Striata orchids easily online for about 6€ each plus shipping. I left them on my terrace and waterered them as normal until the cold set in and their leaves browned and died. I then brought them inside and took one of the plants from the soil. I found a white rhizome and two young green ones growing from it. This was to be expected and these were replanted for next year. I washed the white rhizome in water and scraped the dirt stained skin off, as best I could. I then grated it like I would root ginger with a fine cheese grater. I put it into my pestle and made it into a pulp with the mortar. I remvoed it to a small pan and added about as much water as there was pulp and boiled it for some minutes until the water started to thicken with the extract of the pulp. I added the same amount of water once more and repeated this process until I had a thick porridge. Then I removed it back to the pestle and pounded it once more into as smooth a paste as I could. I then passed it through a tea sieve using a teaspoon to express it through the metal gauze. I collected the gel and bottled it. It took on the consistencey of yougurt more or less. I then put it in the fridge. This extract is also good for medicinal purposes such as reducing inflamation etc. To apply the paste to the string I dipped a finger in the paste and rubbed it much as I had with egg white previously. I cleaned the top board of the instrument from any which ended up on there and allowed it to dry. It did make the 上 a little smoother than before.

Making Baiji glue for silk strings... first I grated the rhizome of the Bletilla Striata orchid with a cheese grater, then mashed it in a pestle and mortar and then boiled it for about ten minutes in water to form a thick paste, and then pressed it through a tea sieve... It dries reasonably quickly and goes on the strings quite nicely. Let's see how it sounds later...

facebook group Guqin

Lawrence Kaster In a decoction, the herb or root (in this case) is boiled in filtered water. I have never needed to mash the root. The essence is easily soluble in water. I think that if you dry the root, you should soak it first, btw.

1

Manage

4 star Chinese films! Our time will come 明月几时有; Chinese Van Gogh; Xi Xiang Ji 1927 silent film

Our time will come 明月几时有 ****



Chinese Van Gogh ****


Xi Xiang Ji  1927  silent film ****


Ghost in the Shell 2016 *** half

Angry Asian Man: Casting Call: Wong Kar-Wai needs actors for 'Tong ...

Angry Asian Man: Casting Call: Wong Kar-Wai needs actors for 'Tong ...: Famed Hong Kong auteur to direct Chinese American gangster saga for Amazon. It's true. Wong Kar-wai is doing TV. The legendary Hong ...

Les Joueurs - Marie Monge

30nov, 1, 4, 6 dec

http://cineuropa.org/nw.aspx?t=newsdetail&l=fr&did=342385

PRODUCTION France

    

Marie Monge tourne Joueurs

par Fabien Lemercier

03/11/2017 - Tahar Rahim et Stacy Martin en tête d’affiche du premier long de la cinéaste. Une production The Film qui sera vendue par Playtime

La réalisatrice Marie Monge

Depuis le 25 octobre, Marie Monge tourne son premier long métrage : Joueurs. Remarquée avec Marseille La nuit (un film de 40 minutes nominé au César 2014 du meilleur court métrage), la réalisatrice a réuni au casting Tahar Rahim (César 2010 du meilleur acteur pour Un prophète [+], nominé au Lumière 2014 du meilleur acteur pour Grand Central [+], apprécié aussi notamment dans Le passé [+], et à l'affiche récemment dans Le prix du succès [+]), Stacy Martin (révélée dans Nymphomaniac I [+] et II [+], appréciée dans Taj Mahal [+] et Le Redoutable [+], et qui vient de tourner dans Amanda), Bruno Wolkowitch (la série Les hommes de l’ombre), Karim Leklou (meilleur acteur au festival de Turin 2015 pour Coup de chaud [+], à son avantage notamment dans Voir du pays [+], Toril [+] et Si tu voyais son coeur [+]) et Marie Denarnaud (Les Corps impatients, La Taularde [+], Plonger [+]).

(L'article continue plus bas - Inf. publicitaire)

Ecrit par Marie Monge et Julien Guetta avec la collaboration de Romain Compingt, le scénario raconte une histoire d’amour et d’addiction dans l’univers des cercles de jeux parisiens.

Produit par Michaël Gentile pour The Film avec David Pierret comme producteur associé, Joueurs (qui est passé par Les Ateliers d’Angers) a été notamment préacheté par Canal+ et Ciné+ et bénéficie du soutien de l’avance sur recettes du CNC et de la région Ile-de-France. Le tournage se déroulera jusqu’au 20 décembre avec Paul Guilhaume (Ava [+]) à la direction de la photographie. La distribution France sera assurée par Bac Films et les ventes par Playtime.

The Film compte actuellement en post-production Premières vacances de Patrick Cassir (avec au casting Camille Chamoux, Jonathan Cohen, Camille Cottin, Jérémie Elkaïm et Vincent Dedienne Chamoux) et sa filmographie inclut notamment Cherchez la femme [+] de Sou Abadi, Singué Sabour - Pierre de patience [+] d’Atiq Rahimi, Espion(s) [+] de Nicolas Saada ou encore Lolo [+] et Le Skylab [+] de Julie Delpy.

Dream of Robot

I dreamt of a white woman, kind of in her 50s, or younger, little bit puffy skinned.

She had put a robot in the oven to bake it - not for eating but for finishing.
I did not see what kind of robot it was, it might not be the geometric robot that I am making
But suddenly the oven door flew open, a whiff of chemical or burnt toxic substance came out of the oven and killed her right there.  She was muffled by the toxic substance.

Then I woke up.
This white woman got killed by these robots she made.  She had not paid attention to the airing air change condition of the room.  She died.

Shocking dream.

I woke up, and thought, was this white woman me?
Or does it have some strange meaning?

I try to find out from the dream book.

---

Today I bought a Borot Avatar from Magnum.  A pink robot machine that you wear as an avatar.
But this avatar has a driver seat - you could put your own pilot inside.  I bought it through gacha, and received a black cat - black cat pilot.  Which i will not use

I use a Sunday Robot as pilot.  The thinker Sunday Robot.
Here is a picture of the Borot w Sunday robot.

---

careers-in-3d-printing; Magic Bean mini 3d printer 魔豆3D打印机

https://3dprint.com/193097/careers-in-3d-printing/

by Mara Hitner | Nov 7, 2017 | 3D Design, 3D Printing, Business, Editorials / Opinions, Education |

It’s not just a fad. Explore how people are using 3D printers in their careers and why it’s important to teach the next generation about this growing technology.

Dr. Alex Chee shows 3D printed surgical models at Maker Faire NY 2017 [Image via MatterHackers]

When speaking with teachers about their efforts to bring 3D design and 3D printing programs into their K-12 classrooms, the one pervasive question is still – why? Teachers try to get funding from administration and are asked – why do you need a 3D printer? Administration springs funding on teachers earmarked for 3D printers, and teachers ask – why do I need to take time out of my classroom to teach how to use a 3D printer? Teachers introduce 3D printing to their classrooms and the parents ask – why are you wasting my child’s time with some “fad”?

Answer – preparation for future jobs. And current jobs. ALL the jobs. Medicine, video games, architecture, manufacturing, product design, special effects for TV and movies, automotive, entrepreneurial efforts we’ve never even heard of (like desktop 3D printers themselves were in 2011) and more all require some form of 3D modeling skills. And the tool of choice to fabricate those models in reality – prototype or final product – is 3D printing.

Teaching simple 3D modeling software like Tinkercad in schools not only prepares students to broaden the scope of job opportunities they might not have considered before, but the practice of designing something in CAD software also covers core STEAM (science, technology, engineering, arts, and math) standards that need to be taught anyway.

Engagement is the unique factor here. Teachers need to work especially hard with the current generation to grab their attention and keep them engaged. Brains are changing. There are more tactile learners and kids that have various issues with paying attention than ever before (even if that issue is being distracted by the cell phone in their pocket.) Incorporating 3D design and 3D printing into the lessons teachers need to teach anyway makes the lesson stick and the classroom time more fun.

Read the full article, including examples of vocations you may not have thought about before which require 3D modeling and 3D printing skills — medicine, architecture, manufacturing, product design, special effects for TV and movies, anthropology, automotive, entrepreneurial — at MatterHackers.

Discuss education, careers, and other 3D printing topics at 3DPrintBoard.com or share your thoughts in the Facebook comments below. 

MatterHackers.

===

smallest sturdy 3d printer, ultimaker style
http://v.youku.com/v_show/id_XMjc4MzQyMjUxMg==.html?spm=a2hzp.8244740.0.0

Magic Bean mini 3d printer 魔豆3D打印机

https://world.taobao.com/item/556978068789.htm
spm=a312a.7700714.0.0.60fdb2b4bln7kH#detail

117 x 108 x 76.5mm, 4.5kg weight of machine, weight of pack is 5kg?  or 7kg

now, 2299rmb on Nov25 2017

如果您的打印机不是魔豆打印机，而是常见的开源3D打印机，又想实现像魔豆一样的wifi局域网打印功能，请购买魔豆wifi模块进行改装：

https://item.taobao.com/item.htm?spm=686.1000925.0.0.4a155084rcPNUL&id=557060696148

欢迎在购买前先观看魔豆3D打印机工作视频，魔豆3D打印机直播地址：

https://live.bilibili.com/3806645

如果相对魔豆进行更多了解，欢迎观看我们前5代魔豆3D的研发记录：

http://v.youku.com/v_show/id_XMjc4MzQyMjUxMg==.html?spm=a2hzp.8244740.0.0

Links to live streaming of non stop printing using Magic Bean; wifi printing chip 

 如果您的打印机不是魔豆打印机，而是常见的开源3D打印机，又想实现像魔豆一样的wifi局域网打印功能，请购买魔豆wifi模块进行改装：

https://item.taobao.com/item.htm?spm=686.1000925.0.0.4a155084rcPNUL&id=557060696148

欢迎在购买前先观看魔豆3D打印机工作视频，魔豆3D打印机直播地址：

 https://live.bilibili.com/3806645 

如果相对魔豆进行更多了解，欢迎观看我们前5代魔豆3D的研发记录：

 http://v.youku.com/v_show/id_XMjc4MzQyMjUxMg==.html?spm=a2hzp.8244740.0.0