To work with Lay-Ceramic, your printer needs some modifications. Kai explains:
"A full metal hotend from PRUSA or E3D is required. Quick and effective warming and good cooling fans are necessary for my "filled" filament.
"You will also need a hobbed bolt made from hardened steel which you can get from ebay. A hobbed bolt must provide a good grip on the filament because the molten filament is very viscous and is resistant against being pushed into the hotend.
"Aside from above parts, you will need a filament heater, a flexible tube to heat the filament up to 35-40 degrees. And this will make the filament less brittle."
Heat-treatment
After the object is printed, this "green" ceramics undergoes a heat-treatment to produce a rigid, finished product. You will need a kiln, a ceramic firing oven which you can find on ebay and a temperature controller (under 80 Euro) in stepwise debindering process in a range from 250° to 500°C and a sintering process up to max. 1200°C.
===
Description du produit
Pack de filament LAYCERAMIC - 3mm - 1kg
Fil 3D LAYCERAMIC 3mm - 1kg
Fil en bobine d'1kg - 3mm
Prix TTC : 150,00 €Prix HT : 125,00 €
Fil en bobine d'1kg - 3mm
Prix TTC : 150,00 €Prix HT : 125,00 €
Le LAYCERAMIC est un filament imprimable chargé en argile.
Caractéristiques :
- Diamètre du filament : 3mm
- Poids de matière : 1kg
ATTENTION : Il s’agit d’un filament expérimental. Il est important de bien lire les notices avant de le mettre en oeuvre. Notament : le filament est très cassant à température ambiante. Il est impératif de le réchaufer (sèche cheveux) à 50 - 70°C pour lui donner de la souplesse.
Documents (en anglais) :
Fabriqué en Allemagne.
Photo non contractuelle.
===
No comments:
Post a Comment