Tuesday 31 January 2017

faclab: research 3d scanners, printers

http://www.3ders.org/articles/20160128-build-your-own-arduino-powered-desktop-3d-scanner.html


Jan 28, 2016 | By Benedict
Think it’s possible to build a desktop 3D scanner with infinite resolution for just $50? Instructables guru Whitney Potter has done just that, using a Nikon DSLR and an Arduino-powered stepper motor. To capture its high-res scans, Potter’s systems uses photogrammetry—a method of constructing 3D images from a set of partially overlapping 2D photographs. The impressive results have to be seen to be believed.
Naturally, the main caveat of the “3D scanner for $50” claim is its assumption of prior DSLR ownership. Builders of the budget scanner will need their own high quality digital camera—unlikely to be found within that strict budget! Once that small condition is met, however, the process becomes extremely wallet-friendly. The principle of Potter’s system is simple: Why buy a dedicated 3D scanner when, with the right manipulation, your high quality digital camera is capable of producing superior results, and on subjects of all sizes?
The main obstacles faced during photogrammetry are photograph quality and spacing. Each photo must be perfectly focused and exposed, and must be spaced around the object to capture its every feature. There must be sufficient overlap between photos so the rendering software knows where each shot belongs. Getting this spacing right can be achieved with some practice on large subjects, but is incredibly difficult with small objects. This is where Potter’s Arduino-powered stepper motor comes in.
The DIY 3D scanner uses a stepper motor controlled by an Arduino board to turn the scanned object by a fixed amount, before an LED triggers the camera’s wireless sensor, setting off the shutter. This process is repeated until photos have been collected from all angles, allowing one’s photogrammetry software to construct an accurate and high resolution 3D image of the subject. There are just five key ingredients to the budget 3D scanner: Arduino, stepper motor driver, stepper motor, IR LED and LCD shield.
Although Potter’s Arduino sketch has been configured to work with Nikon DSLRs, owners of other brands can simply alter a section of the code to suit their own model. Potter has used Sebastian Setz’s Multi Camera IR Control library, so the scanner will work with virtually any brand of camera with an IR remote. When the code is in place, the subject needs to be well-lit so the camera can capture all of its precise details. The captured set of photos can then be processed using photogrammetry software. Potter recommends Agisoft Photoscan ($180), Autodesk Memento or Autodesk 123D Catch (budget option).
Potter’s handy guide demonstrates an innovative method for 3D scanning on a budget—using resources at most people’s disposal. Could DIY photogrammetry be the future of desktop 3D scanning? Watch out, 3D scanner manufacturers!



http://www.3ders.org/articles/20160728-royal-academy-of-arts-offers-visitors-an-ultra-high-res-3d-digital-sculpture-in-four-seconds.html
photogrammetry system
Jul 28, 2016 | By Andre
For some time now 3D scanning, especially when it relates to recreating the intricacies of the human face, has been limited in some ways. Whether its low-resolution capture or lengthy waits or cumbersome post-processing, there aren't many examples of a device that can capture all the details of the human face (and beyond) in just four seconds. The Royal Academy of Arts in London has recently begun experimenting with a photogrammetry system that takes 96 photos in rapid succession via an eight camera system. These images can then be processed into a digital 3D model, replicating every feature of the face in intricate detail. The results are something some of history's greatest artists would be jealous of no doubt.

http://www.3ders.org/articles/20160208-student-designs-curatio-3d-hand-scanner-equipped-with-32x-raspberry-pi-cameras.html


http://www.3ders.org/articles/20161019-3d-scanning-sheds-light-on-mysteries-of-ancient-chinese-terracotta-army.html
type of 3d scanners used for terracotta army

Artec Spider 3d scanner


No comments:

Post a Comment